Robotics — Compute & Capture Infrastructure
Training, simulation, onboard inference and capture infrastructure. Feeds the Data & Policy page.
Filters
-
NVIDIA Jetson AGX Thor Developer Kit
Contact for PricingThe flagship on-robot compute for humanoid and multi-arm platforms. 2,070 FP4 TFLOPS and 128 GB of LPDDR5X means a large vision-language-action mod...
View full details -
NVIDIA Jetson AGX Orin Developer Kit (64GB)
Contact for PricingOn-robot compute for a full-size rig. 275 TOPS and 64 GB of LPDDR5 is enough to run multi-camera perception, an Isaac ROS graph and policy inferenc...
View full details -
NVIDIA DGX Spark
Contact for PricingA deskside training box with 128 GB of coherent unified memory. In a robot-learning programme this is the machine that sits beside the capture rig:...
View full details -
NVIDIA Jetson Orin Nano Super Developer Kit
Contact for PricingThe entry point into on-robot inference. 67 TOPS in a 100 × 79 mm board at 7-25 W — enough for stereo perception and a small policy on a teleoperat...
View full details -
Robotiq FT 300-S Force Torque Sensor
Contact for PricingA six-axis force/torque sensor that mounts at the wrist. If your arm is position-controlled and you need a contact-force channel in the dataset — o...
View full details -
Orbbec Multi-Camera Sync Hub Pro
Contact for PricingThe part of a multi-camera rig nobody budgets for and every dataset needs. Without a common trigger, eight cameras expose at eight slightly differe...
View full details -
Orbbec Multi-Camera Sync Hub Dev — Star
Contact for PricingStar-topology trigger hub for a small rig — typically a three or four camera teleoperation cell. One primary, up to four secondaries, chainable if ...
View full details -
Orbbec Multi-Camera Sync Hub Dev — Daisy Chain
Contact for PricingDaisy-chain trigger hub for rigs where cameras run along a rail or frame and star cabling would mean a lot of wasted cable. Same capacity as the st...
View full details -
Orbbec Sync Adaptor — 8-Pin to RJ45
Contact for PricingOne adaptor per camera. This is the piece that connects a camera's 8-pin sync port to the RJ45 Sync Hub Pro — order one for every camera in the rig...
View full details -
Luxonis FSYNC Y-Adapter
Contact for PricingHardware frame sync for OAK cameras. Every device on the chain begins sensor exposure at the same instant — Luxonis documents FSYNC precision below...
View full details -
XELA Robotics uSkin uSPa 44 Tactile Patch
Contact for PricingSixteen taxels in a patch smaller than a postage stamp, each reading three axes — shear in X and Y as well as normal force in Z. Shear is the chann...
View full details -
XELA Robotics uSkin uSPa 46 Tactile Patch
Contact for PricingThe larger uSkin patch: 24 taxels across a 30.6 × 50.6 mm area at under 5 mm thick. Sized for a palm, a forearm, or a wide gripper pad where the uS...
View full details -
XELA Robotics uSkin uSPr 2F — Tactile Jaws for Robotiq Grippers
Contact for PricingA drop-in tactile upgrade for Robotiq 2F-85 and 2F-140 grippers. You keep the gripper and the cell; you gain force and slip channels the gripper ca...
View full details -
XELA Robotics uSkin uSCu ALHA — Curved Tactile Fingertips for Allegro Hand V4
Contact for PricingCurved uSkin fingertips shaped for the Allegro Hand V4. The Allegro is the standard research hand in manipulation labs and it ships without distrib...
View full details