Motion Capture
Xsens Link Next-Generation Full System — Size XXL
By xsens
Next-generation wearable inertial motion capture for animation, human-motion research and robotics workflows. Select a full system with a garment size or the separate sensor kit without eSuit.
Request a quote. Public pricing is not displayed.
Configuration: Full System — Size XXL
Your Configuration
Ships within 5-10 days
- Quote required. Knoxlabs confirms availability, lead time and the selected configuration before ordering.
🛠
Deployment Expertise
XR specialists on staff
⚙
Device Configuration
Provisioned & ready to use
🎧
Enterprise Support
Hardware, software & deployment help
🌐
Global Fulfillment
Shipped worldwide
Features
- Performance—240 Hz; approximately 20 ms latency; up to approximately 150 m wireless range; Wi-Fi 6E; Hub 3–4 h / external battery 7–8 h; up to 50 h on-body recording.
- Body-size guide (cm)—height 189 - 215; chest 106 - 109; waist 95 - 99; hip 108 - 111. Fit guide only, not shipping dimensions.
- Supplied item—Published full-system package includes eSuit, Hub, sensors, router, case, power/accessory components. Selected size comes from the current book; confirm actual sales package.
Technical Specifications
Everything you need to know about tracking, performance, connectivity, and deployment hardware.
Selected configuration
- Product
- Xsens Link Next-Generation Full System — Size XXL
- Configuration
- Full System — Size XXL
Technical details
- Performance
- 240 Hz; approximately 20 ms latency; up to approximately 150 m wireless range; Wi-Fi 6E; Hub 3–4 h / external battery 7–8 h; up to 50 h on-body recording.
- Body-size guide (cm)
- height 189 - 215; chest 106 - 109; waist 95 - 99; hip 108 - 111. Fit guide only, not shipping dimensions.
- Tracking hardware
- 17 body MTX3 sensors and one prop sensor; sensors click into the eSuit harness.
- Connectivity
- Wi-Fi 6E across 2.4, 5 and 6 GHz; router-based receiving setup.
- Storage versus buffering
- Hub stores up to 50 hours of on-body recording; communication buffering is a separate 10-minute specification.
- Buffering
- Up to 10 minutes of on-body buffering.
- RF pad
- Use the supplied RF pad between the Hub and body only when operating in the 6 GHz Wi-Fi band.
- Remote on-body recording
- The dedicated next-generation OBR guide says synchronized remote OBR is not currently available on the Hub.
- OBR GNSS
- The next-generation OBR guide says GNSS data is legacy MVN Link only; select no GNSS data for Xsens Link.
- 2026.8 Hub connection workflow
- Configure Wi-Fi through XS Hub Web Admin instead of the removed software Wi-Fi tab. Hub firmware 1.18.0 uses DHCP with a 10-second link-local fallback.
Compatibility and deployment
- Compatibility
- Compatible Xsens capture software is required; edition-dependent exports, integrations and actor limits apply.
- Scope / supplied item
- Published full-system package includes eSuit, Hub, sensors, router, case, power/accessory components. Selected size comes from the current book; confirm actual sales package.
- Setup / care
- Remove Hub and trackers before washing. See next-generation garment care and getting-started sources. For software 2026.8 / Hub firmware 1.18.0, use XS Hub Web Admin for Wi-Fi setup; factory reset deletes stored recordings.
Product details
Overview
Selected configuration
Configuration: Full System — Size XXL
Next-Generation Xsens Link is the flagship high-performance inertial motion capture system for animation, biomechanics, sports, rehabilitation, humanoid robotics, simulation, and AI training. The redesigned eSuit integrates washable cabling with one-click MTX3 sensors for a faster, more repeatable workflow.
Key features
- 17 one-click body sensors plus one prop sensor
- Up to 240 Hz output and approximately 20 ms latency
- Wi-Fi 6E connectivity with up to 150 m range
- Three to four hours internal battery plus seven to eight hours external power
- Hot-swappable external battery support
- Up to 50 hours of internal recording storage
- Up to 40% faster setup than the previous generation
Compatibility
Xsens Animate, Xsens Analyze, and Xsens Humanoid software. ROS 2, NVIDIA Isaac Sim, MuJoCo, Unreal Engine, Unity, and supported production or research integrations vary by software edition.
What is included
Full-system configurations include Xsens Link hardware and the selected eSuit size. A Link-only sensor kit without eSuit is also available.
Ordering and configuration
This is a quote-only Xsens product. Knoxlabs will confirm system compatibility, license type, lead time, and the correct configuration before order placement.
Request a quote: Availability, lead time, licensing eligibility, and the final configuration are confirmed before ordering. Public pricing is not displayed.
Need More Than Hardware?
Knoxlabs also handles the deployment.
Device setup
MDM enrollment
Asset tagging
Shipping coordination
User onboarding
XR deployment consulting
FAQ
Which configuration is this listing for?
Xsens Link Next-Generation Full System — Size XXL. Selected option: Full System — Size XXL.
What should be confirmed before ordering?
Compatible Xsens capture software is required; edition-dependent exports, integrations and actor limits apply. Quote required. Knoxlabs confirms availability, lead time and the selected configuration before ordering.
What is included?
Published full-system package includes eSuit, Hub, sensors, router, case, power/accessory components. Selected size comes from the current book; confirm actual sales package.
Where should I start with setup and care?
Remove Hub and trackers before washing. See next-generation garment care and getting-started sources. For software 2026.8 / Hub firmware 1.18.0, use XS Hub Web Admin for Wi-Fi setup; factory reset deletes stored recordings.
Does on-body recording include remote synchronization or GNSS?
The dedicated next-generation Hub guide does not currently support synchronized remote on-body recording. Its GNSS recording option applies to legacy MVN Link, not next-generation Xsens Link.
